How Big Wally's Plaster Magic Repairs Plaster and Cracked Ceilings the Easy Way

Before: The most vexing problem with plaster is that it can crack or become loose from its wood lath. Big Wally’s Plaster Magic—the Ultimate Repair Adhesive® solves this problem forever. It re-establishes a solid yet flexible bond that lasts.
Drill It : Drill holes through the plaster surface with a 3/16" masonry bit.
Vacuum It Remove plaster dust and debris from the drill holes with a shop-vac or vacuum prior to applying the conditioner.
Spray It Spray Big Wally´s Conditioner into each hole; wait 10 minutes before using the adhesive.
Glue It Inject Big Wally´s Adhesive into each hole after the conditioner has been allowed to soak in.
Clean It Wipe away excess material from surfaces with warm water and a soft sponge or cloth.
Clamp It Clamp the wall or ceiling temporarily with screws and 2" plastic washers – bring the plaster gently back to its original plane. Allow to cure for 24 to 48 hours.
Fill It Remove the screws and washers after the adhesive has cured. Fill holes and cracks with joint compound or plaster.
After! The plaster has been stabilized – the wall or ceiling is now ready to be prepped for painting or finishing.

Before: